Main Specifications |
Built-in Devices | 4x Super X8DTT-IBQF |
Dimensions (WxDxH) | 3.5" (89mm) x 17.2" (437mm) x 28.5" (724mm) |
Enclosure Color | Black |
Form Factor | 2U Rackmount - CSE-827T-1400B |
Weight | 85 lbs (38.6kg) |
Processor |
Compatible processor | Intel® Xeon® Processor X5600/E5600/L5600 Series (Westmere) 40W - 95W |
| Intel® Xeon® Processor X5500/E5500/L5500 Series (Nehalem-EP) 38W - 95W |
Compatible Socket | Dual 1366-pin LGA Sockets / Supports up to two Intel® 64-bit Xeon® processor(s) |
QPI | up to 6.4 GT/s |
System Memory |
DIMM Sizes | 1GB, 2GB, 4GB , 8GB** , 16GB** |
Error Detection | Detects double-bit errors (using ECC memory) |
| Corrects single-bit errors |
| Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
Memory Capacity | 12x 240-pin DIMM sockets |
| Supports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory |
| Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory |
| Memory Mirroring supported |
Memory Type | 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
Memory Voltage | 1.5 V |
On-Board Devices |
Network Controllers | VMDq support for better performance of virtualization |
| 1x Realtek RTL8201N PHY (dedicated IPMI) |
Chipset | Intel® 5520 (Tylersburg) chipset |
| ICH10R + IOH-36D |
Clock Generator | 932S421 chip |
Graphics | Matrox G200eW |
Infiniband | Mellanox ConnectX QDR Infiniband 40Gbps Controller |
IPMI | Support for Intelligent Platform Management Interface v.2.0 |
| IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| Winbond® WPCM450 BMC |
| Intel® 82576 Dual-Port Gigabit Ethernet Controller |
| Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Intel® I/OAT 3 support for fast, scaleable, and reliable networking |
SATA | Intel ICH10R SATA 3.0Gbps Controller |
| RAID 0, 1, 5, 10 support |
Super I/O | Winbond W83527HG chip |
Input / Output |
LAN | 2x RJ45 LAN ports |
| 1x RJ45 Dedicated IPMI LAN port |
SATA | Six Serial ATA ports |
| 3 SATA hard drives supported |
Serial Port / Header | 1 Fast UART 16550 serial port |
USB | 4 total USB ports, 2.0 Compliant / 1.1 Compliant |
VGA | 1x VGA Port |
| 2 rear + 1 header (2 Ports) |
Front Panel |
Buttons | Power On/Off button, UID button |
LEDs | Power LED (on power button), UID LED (on UID button), Network activity LED, System Overheat/fan fail/power fail/ LED |
Expansion / Connectivity |
Expansion Slots Total (Free) | 1 (x16) PCI-E ( Low Profile) |
Hard Drive |
Backplane | 2U Hard drive Backplane |
Drive Bays |
Hot-swap | 3x 3.5" SATA Hot-swap drive bays |
Power Supply |
Certification | 80 PLUS Gold Certified |
Power Supply | 1400W high-efficiency power supply with PMBus |
Power Supply | PWS-1K21P-1R / PDB-PT827-S4204 |
System Cooling |
Fans | 4x Cooling Fans |
System BIOS |
BIOS Features | Plug and Play (PnP), PCI 2.2, ACPI up to 3.0, USB Keyboard support |
BIOS Type | 32Mb SPI Flash EEPROM with AMI® BIOS |
Operating Environment / Compliance |
Non-Operating Relative Humidity | 5 to 95% (non-condensing) |
Non-Operating Temperature | -40°to 70°C (-40°to 158°F) |
Operating Relative Humidity | 8% to 90% (non-condensing) |
Operating Temperature | 10°to 35°C (50°to 95°F) |
RoHS | RoHS Compliant |
Parts List - (Items Included) |
Air Shroud | MCP-310-82701-0B |
Backplane | BPN-SAS-827T |
Cables | CBL-0316L |
CD Driver | CDR-X8 |
Drive Trays | MCP-220-00024-0B |
Fans | FAN-0094L4 |
Heatsink / Retention | SNK-P0037 |
Motherboard / Chassis | MBD-X8DTT-IBQF / CSE-827T-1200B |
Mounting Rails | MCP-290-00053-0N |
Power Supply | PWS-1K21P-1R / PDB-PT827-S4204 |
Riser Card | RSC-R1U-E16R |
|